Skip to content
YoupSpace Docs

Operating Checklist

Use this as a quick reference.

It does not replace a full vehicle flight-readiness procedure.

Before configuration

Section titled “Before configuration”
  • Hazardous outputs disconnected
  • Correct AstroNav Nano board identified
  • Correct firmware identified
  • USB power connected
  • Howto.txt reviewed
  • Settings.ini reviewed

Before flight

Section titled “Before flight”

Configuration

Section titled “Configuration”
  • Settings reviewed
  • Settings tested
  • FIRE_PYRO_APOGEE confirmed

Hardware

Section titled “Hardware”
  • Battery inspected
  • Battery voltage checked
  • Polarity checked
  • Wiring inspected
  • Connectors inspected
  • Board securely mounted

Startup

Section titled “Startup”
  • Board kept stationary during calibration
  • Calibration completed
  • Board reached Idle
  • No critical fault present

Vehicle

Section titled “Vehicle”
  • Recovery system inspected
  • Deployment hardware inspected
  • Launch hardware inspected
  • Independent flight-readiness review completed

After flight

Section titled “After flight”
  • Landing confirmed
  • Mission log saved
  • Power removed safely
  • Hazardous hardware disconnected
  • CSV log copied
  • Original CSV preserved
  • Warnings reviewed
  • Faults reviewed
  • Pyro status reviewed